Experience the revolutionary strength of Hardie® Foam, a heavy-duty, fast-acting adhesive designed to complement Hardie® Backer tile backer board installation.

This ready-to-use, fast-curing polyurethane adhesive is engineered for seamless bonding of Hardie® backer boards to diverse substrates including concrete, wood, and metal. Suitable for both indoor and outdoor settings, Hardie® Foam adhesive simplifies the installation process, making it faster and cleaner than ever before.

Features & Benefits:

• Efficiency at Its Best: Tile or plaster just 1 hour after application, significantly increasing installation speed by up to 50%.

• Fast Curing Time: Achieves a strong bond quickly, allowing for rapid progress on projects.

• Screw-Free Application: Eliminates the need for screws, creating a cleaner finish.

• Hassle-Free Use: With no mixing required, this adhesive is ready to use straight from the can, ensuring a mess-free application.

• Versatility: Paintable and applicable on wet surfaces, offering flexibility in use.

• Insulation Properties: Acts as a thermal and acoustic insulator, enhancing the comfort of your space.

• Coverage: One can is sufficient for approximately 5 Hardie® backer boards, making it a cost-effective solution.

Installation Instructions:

Ensure substrates are clean, dust-free, and degreased for optimal adhesion.

Before application, shake the can vigorously for 30 seconds to ensure the adhesive is well mixed. Attach the tube securely to the valve. For better adhesion, lightly moisten the surfaces to be bonded. Invert the can and apply the adhesive in 3cm beads across the HardieBacker Board, ensuring at least one-third of the surface is covered upon pressing. Allow the adhesive to set for about 5 minutes before positioning the board onto a vertical surface. To achieve the best results, press the board firmly against the substrate and maintain pressure for 60 seconds. It is essential to wait at least 60 minutes for the adhesive to cure fully before beginning to tile.

After application, remember to clean the nozzle and valve thoroughly.

Always use HardieFoam™ adhesive in well-ventilated areas and wear appropriate safety gear, including goggles and gloves.